LAU 38-2087-01

LAU 38-2087-01
Images are representative of the product, actual product may differ.

LAU 38-2087-01

LAU 38-2087-01


Lau 38-2087-01 - 1" Diameter Pillow Block Sleeve Bearing (Pair)

More details

Lau 38-2087-01 - 1" Shaft Diameter Pillow Block Sleeve Bearing (Pair)

This pair of high quality self-aligning, static free, pillow block bearings will assure quiet operation and many years of trouble-free performance. Heavy neoprene cushioned, re-oilable porous bronze bushing in a pressed steel ball unit held firmly in a housing of two-piece interlocking steel. Designed for use on horizontal shaft applications only.

For further, detailed information on this item and other Lau products, please download the Specification Guide below.

Lau's universal replacement products are designed to endure the most rugged handling and withstand the increased workload expected of quality replacement products through years of service. To learn more about Lau and their excellent, broad range of HVAC products, please visit their website.

Pillow Block ball bearings are pre-lubricated from the factory. Normal operating temperature is from -30°F to 200°F. Under normal operating conditions (clean environment and RPM under 1500) re-lubrication is recommended at 6-12 month intervals. When re-greasing, care should be taken not to over grease as seal blow out and/or bearing burnout can occur.

What's Included:

  • (2 each) Lau 1" pillow block bearings
  • Two 1/8" rubber spacers for each bearing provided for use, if needed

Available Product Literature:
(These files require the free Adobe Reader or similar to view.)

Related Products

Contact Form